Mitsubishi Challenger lift kits

In the kit: 2× Formula 4x4 Shock Absorbers, 2× Part 50003, 2× Formula 4x4 Leaf Springs, 2× Swing Shackles, 4× U-Bolts, 1× SuperPro Bush Kits, 1× Part SPF0187K, 1× Part SPF0192K.

• Part CHAL-001
• Fulcrum rates the kit at 25-40mm. On the Mitsubishi Challenger PA, expect about 25-35mm.
• This lift kit will increase your front ride height by either 35mm - 55mm and the rear 35mm - 70mm. The varying degree in change is due to factory vehicle ride heights and weights carried. To get the correct height a HD torsion bar upgrade is required.

In the kit: 2× Formula 4x4 Shock Absorbers, 2× 50006 & King Springs 1 x KCRS-33.

• Part CHAL-003
• Fulcrum rates the kit at 25-40mm. On the Mitsubishi Challenger PA, expect about 25-35mm.
• This lift kit will increase your front ride height by either 35mm - 55mm and the rear 35mm - 70mm. The varying degree in change is due to factory vehicle ride heights and weights carried. To get the correct height a HD torsion bar upgrade is required.